欢迎您访问TSD SOLAR官方网站
您当前位置: 首页 > 产品中心 > Solar Roof System
Tin Roof Standing Seam Clamp Mounting Solution
Due to different shapes of tin roof, there are types of standing seam clamps such as vertical edge locking clamp, angle type clamps and trapezoidal clamps etc. TSD has developed kinds of tin roof clamps over the past decade. The vertical edge locking clamps and angle type clamps are mounted onto the tin roof directly without any perforation or drilling, which makes the roof without any water-proof problems.These clamps are widely used in the warehouse or workshop tin roofs which are structure efficient and durable.
Specification

Max wind capacity:44m/s

Max snow capacity:0.8KN/m2

Span range:0.1-1.8m

Standard length of block:40mm 

Design standard:AS/NZS1170,ASCE 7-05, DIN1044

Performance parameter

Installation site: tin roof

Main material:AL6005-T5 / SUS304

Fastener material:SUS304

Applicable modules:frame or frameless

Component arrangement: horizontal / vertical

Warranty:10 years

产品特点

  • Easy installation
    Tongshengda's self-developed fixtures can be easily installed with a simple tool. Installation only needs to tighten the ridge and lock bolts, two actions. Greatly reduce the difficulty of installation and shorten the working hours.
  • Strong speciality
    The fixture is suitable for a specific tile ridge. The professional structural design makes the support and the tile ridge perfect. It will not cause any damage to the tile ridges, and the ridges will remain as large as possible. No need to pierce or modify the tile ridges to avoid leakage. It also guarantees the drainage effect of the tile ridge, and is perfectly integrated with the tile ridge.
  • Strong compatibility
    The fixture can meet the installation requirements of different specifications of PV modules. It can be combined with other equipment to form a complete bracket system, which is a stable and versatile connection platform.
  • 1.jpg
    High precision
    The length of the clamp is accurate to the millimeter. During the construction process, the second cutting is not carried out because the length is too long or too short.
  • 2.jpg
    Safe and reliable
    The fixtures are made of high quality aluminum and stainless steel to prevent corrosion and oxidation. The product can be recycled to reduce environmental pollution. The overall structure fully considers the factors of load bearing, wind resistance, snow resistance, earthquake resistance, etc., and has been calculated and tested to ensure safety and reliability.

安装说明

Installation Guide


1.jpg            1.jpg

step 1: side the clamps into the light rail                                    Step 2: adjust clamps distance, fasten onto the roof


1.jpg            image.png       

Step 3: slide the end and mid clamps into the rail                       Step 4: install the panels


案例展示

  联系客服
  13779953611